top

 

EP-high-performance oils.

Series LFC 1000. Mineral based oils with high protection against wear and corrosion, -best characteristics for work under high load, -long service times , -stays extremely clean-

DesignationISO-VGTemperatures (°C)Remarks
LFC 10055From -20°C / +80°CPneumatic oil. Rinse oil.
LFC 1010 (4)10From -20°C / +80°CPneumatic oil. Rinse oil.
LFC 1015 (4)15From -20°C / +100°CPneumatic oil.
LFC 102222From -15°C / +100°CPneumatic oil. Rinse oil.
LFC 103232From -15°C / +120°CPneumatic oil. Hydraulic oil.
LFC 104646From -15°C / +120°CHydraulic oil. Circulation oil. Gearbox oil.
LFC 1068 (1) (2)68From -10°C / +120°CHydraulic oil. Circulation oil. Gearbox oil. Chain oil.
LFC 1100 (1) (3)100From -10°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 1150 (1)150From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 1220220From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 1320320From -10°C / +120°CGearbox oil. Bearing lubrication oil.
LFC 1460460From -10°C / +120°CGearbox oil. Bearing lubrication oil.
LFC 1680680From -5°C / +120°CGearbox oil. Bearing lubrication oil.
LFC 110001000From -5°C / +120°CGearbox oil. Bearing lubrication oil.
LFC 115001500From -5°C / +120°CGearbox oil. Bearing lubrication oil.

1) with FE 8 anti-wear test approval
2) long-life service oil manroland
3) long-life service oil KBA Planeta (indent-No. L 082 0639)
4) If technically possible, then  replacement with LFC 1022 is recommended
Pn = pneumatic, W = white oil, Hy = hydraulic, Um = circulation, Ge = gearboxes, Sp = rinse oil, Ke = chains, La = bearing, Ko = compressor

Series LFC 1000 H or better named Series LFC 1000 HAFT. Mineral based adhesive oils with high protection against wear and corrosion, -best characteristics for work under high load, -long service times , -stays extremely clean-

Can be used as adhesive chain oils, or alternative the oils has often helped reducing an increased oil spill of older leaking machines. There is no guarantee, but this was often the proven results.

DesignationISO-VGTemperatures (°C)Remarks
LFC 1046 Haft / LFC 1046 H46From -15°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 1068 Haft / LFC 1068 H68From -10°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 1100 Haft / LFC 1100 H100From -10°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 1150 Haft / LFC 1150 H150From -10°C / +120°CCirculation oil. Gearbox oil. Chain oil. Bearing lubrication oil.
LFC 1220 Haft / LFC 1220 H220From -10°C / +120°CCirculation oil. Gearbox oil. Chain oil. Bearing lubrication oil.
LFC 1320 Haft / LFC 1320 H320From -10°C / +120°CCirculation oil. Gearbox oil. Chain oil. Bearing lubrication oil.
LFC 1460 Haft / LFC 1460 H460From -10°C / +120°CCirculation oil. Gearbox oil. Chain oil. Bearing lubrication oil.
LFC 1680 Haft / LFC 1680 H680From -10°C / +120°CCirculation oil. Gearbox oil. Chain oil. Bearing lubrication oil.
LFC 11000 Haft / LFC 11000 H1000From -10°C / +120°CGearbox oil. Bearing lubrication oil.
LFC 11500 Haft / LFC 11500 H1500From -10°C / +120°CGearbox oil. Bearing lubrication oil.

The German word "HAFT" means "adhesive".

Series LFC 3000. Semi-synthetic Paraffin oils (CLP-oils ; application without extended oil change intervals - this equals normal standard service intervals; oil change according to service manual )

DesignationISO-VGTemperatures (°C)Remarks
LFC 3015 (1)15From -20°C / +120°CPneumatic oil. Rinse oil.
LFC 302222From -20°C / +120°CPneumatic oil. Rinse oil. Hydraulic oil. Chain oil.
LFC 303232From -20°C / +120°CPneumatic oil. Hydraulic oil. Chain oil.
LFC 304646From -20°C / +120°CHydraulic oil. Circulation oil. Gearbox oil. Chain oil.
LFC 306868From -15°C / +120°CHydraulic oil. Circulation oil. Gearbox oil. Chain oil.
LFC 3100100From -15°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 3150150From -15°C / +120°CGearbox oil. Chain oil.
LFC 3220220From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 3320320From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 3460460From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 3680680From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 31150[~ 1150 ]From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.

1) If technically possible, then  replacement with LFC 3022 is recommended

Series LFC 4000. Fullsynthetic Ester based oils.)

DesignationISO-VGTemperatures (°C)Remarks
LFC 403232From -40°C / +130°CHydraulic oil.
LFC 404646From -40°C / +130°CHydraulic oil. Chain oil. Compressor oil.
LFC 406868From -35°C / +130°CHydraulic oil. Chain oil. Compressor oil.
LFC 4100100From -35°C / +140°CCirculation oil. Gearbox oil. Chain oil. Compressor oil.
LFC 4150150From -35°C / +140°CCirculation oil. Gearbox oil. Chain oil. Compressor oil.
LFC 4220220From -35°C / +140°CGearbox oil. Chain oil. Bearing lubrication oil. Compressor oil.
LFC 4320320From -35°C / +140°CGearbox oil. Chain oil. Bearing lubrication oil. Compressor oil.

Series LFC 7000. Fullsynthetic Silicone oils. 

DesignationViscosity @ +40°CTemperatures (°C)Remarks
LFC 703838From -55°C / +140°CRelease agent, care product, anti-friction agent, hydraulic fluid
LFC 707575From -55°C / +150°CRelease agent, care product, anti-friction agent, hydraulic fluid
LFC 7260 (H1)262From -50°C / +150°CRelease agent, care product, anti-friction agent, hydraulic fluid
LFC 7370374From -50°C / +150°CRelease agent, care product, anti-friction agent, hydraulic fluid
LFC 7750750From -50°C / +150°CRelease agent, care product, anti-friction agent, hydraulic fluid

Series LFC 8000. Fullsynthetic Poly glycol based oils. 

DesignationISO-VGTemperatures (°C)Remarks
LFC 803232From -20°C / +120°CHydraulic oil
LFC 804646From -20°C / +120°CHydraulic oil.
LFC 806868From -20°C / +120°CHydraulic oil. Circulation oil.
LFC 8100100From -20°C / +120°CCirculation oil. Gearbox oil.
LFC 8150 (H1)150From -20°C / +120°CCirculation oil. Gearbox oil. Chain oil. Bearing lubrication oil.
LFC 8220 (H1)220From -20°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 8320 (H1)320From -20°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 8460 (H1)460From -20°C / +120°CGearbox oil. Bearing lubrication oil.
LFC 8680680From -20°C / +120°CGearbox oil. Bearing lubrication oil.
LFC 810001000From -20°C / +120°CGearbox oil. Bearing lubrication oil.

Series LFC 9000. Fullsynthetic Poly-Alpha-Olefines based oils (with H1-approval)  

DesignationISO-VGTemperatures (°C)Remarks
LFC 9032 (1)32From -45°C / +150°CHydraulic oil. Circulation oil. Compressor oil.
LFC 904646From -45°C / +150°CHydraulic oil. Circulation oil. Compressor oil.
LFC 906868From -40°C / +150°CCirculation oil. Gearbox oil. Compressor oil.
LFC 9100100From -40°C / +150°CCirculation oil. Gearbox oil. Compressor oil.
LFC 9150150From -40°C / +150°CGearbox oil. Chain oil. Bearing lubrication oil. Compressor oil.
LFC 9220220From -35°C / +150°CGearbox oil. Chain oil. Bearing lubrication oil. Compressor oil.
LFC 9320320From -35°C / +150°CGearbox oil. Chain oil. Bearing lubrication oil. Compressor oil.
LFC 9460460From -30°C / +150°CGearbox oil. Chain oil. Bearing lubrication oil. Compressor oil.
LFC 9680680From -20°C / +150°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 910001000From -20°C / +150°CGearbox oil. Chain oil. Bearing lubrication oil.

1) If technically possible, then  replacement with LFC 9046 is recommended

Series LFC 34000. Semi-synthetic Paraffin oils (CLP-oils with FE 9-extended-test-run at +40°C; extended oil change intervals are possible; special gear oils with paramount anti-wear properties from +40°C onwards) 

DesignationISO-VGTemperatures (°C)Remarks
LFC 34068 (1)68From -15°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 34100 (1)100From -15°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 34150150From -15°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 34220220From -15°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 34320320From -10°C / +120°CGearbox oil. Chain oil.
LFC 34460460From -10°C / +120°CGearbox oil. Chain oil.

1) with  FE 9-extended-test-run at +40°C.


 

Special high-performance oils.

Special Series . High quality oils with high protection against wear and corrosion, and a taylormade application in the industry.

DesignationISO-VGTemperatures (°C)Remarks (to be used for : )
LFC 92100100From -40°C / +150°CRobot gearboxes, corrugated gearboxes. With H1-approval.
LFC 9210001000From -30°C / +150°CRobot gearboxes, worm drives. With H1-approval.

Lubricating concentrates (Additives) / Extended long-lifetime gear oils.

Series LA. Concentrates to significantly increase working performance of commercially available mineral oils (excluded hypoid oil; to use as CLP gear oils, please consult us). Border line lubrication characteristics will be improved considerably. 

Gives reduction of wear and temperatures, - regular dosage 20%, - extreme dosage: pure when heavy duty or (as in Denmark )Extended Long-Lifetime operation is requested.

DesignationISO-VGTemperatures (°C)Remarks
LA 168From -20°C /+120°CFor mineral oils of ISO VG 46, 68, 100 . (circulation oils manroland No. 80.94S40-0117 )
LA 4150From -20°C /+120°CFor mineral oils of ISO VG 100, 150, 220 . (Gear oils)
LA 7320From -10°C /+120°CFor mineral oils of ISO VG 220, 320, 460, 680 . (Gear oils manroland No. 80.94S40-0128 )
LA 8
From -5°C /
 +80°C
Pure adhesive lubricant / Dosage LA 8 approx 5% to 8% to mix. Temperature indications represent average values. Please contact us.
LA 8P
From -10°C / 
+80°C
Pure adhesive lubricant / Dosage LA 8P approx 5% to 8% to mix. Temperature indications represent average values. Please contact us.
LA 8 (H1)
From -10°C / 
+80°C
Pure adhesive lubricant. With H1-approval. Temperature indications represent average values. Please contact us.

Lubricating greases

Lubricating greases for gripper shaft bearings.

DesignationNoteTemperatures (°C)NdmvalueBaseoil/thickenerRemarks
GLL 6NLGI 3 , 2From -20°C / +100°C300.000M, LiAdhesive, Long fibred, for roller/slide bearings, shakers, open lubricating points. Vibrators in construction Industry. (Denmark: Truck Loading platforms)
GLL 7NLGI 3 , 2 , 1From -20°C / +120°C400.000M, LiMulti Purpose grease for High EP loads. For lubrication of roller and slide bearings under medium and heavy loads. To be used where a clean Highest EP grease is requested without black solids as MoS2. Printing machines. Building Cranes. Transport material under salt- and saltwater influence. Adhesive, Long fibred.
GLL 10NLGI 2 , 1From -20°C / +120°C300.000M, LiMoS2-grease. Lithium saponified multi-purpose grease with best adhesion properties for heavy loads in roller- and slide bearings as well as open lubricating points. Above a temperature of +60°C the adhesion quality will be reduced. (Denmark: Big open Toothwheels on Buggies for Building Constuction Cranes)
GLG 16NLGI 0 ,00 ,000From -20°C / +100°CM, LiFor gears under heavy work load; Lithium saponified semi-liquid grease with outstanding sliding-friction behaviour and high load carrying abilities. This semi-liquid grease is approved for central lubrication devices.
GLS 37/N1MoS2-greaseStrongly resistant to pressure and spin-off. A grease with peak adhesion values for use with slide bars, slide rails and curve discs. For grease application a heavy duty grease gun is necessary. manroland No. 80.94S40-0137.
GLS 72M, aoVAssembly- and disassembly paste for temperatures up to +1500°C
GLS 75NLGI 2From -20°C / +120°C400.000M, LiLong Term EP-multi-purpose grease , with high oxidiation stability, for lubrication of roller and slide bearings under medium and heavy loads. Printing machines. (Like GLL 7/N2)
GLS 131NLGI 2From -20°C / +120°C250.000M, LiHigh performance, for rolling bearings, plain bearings and open lubrication points
GLS 135NLGI 2 , 1, 00From -20°C / +120°C500.000M, LiShort fibred and very homogeneous grease with special lithium soap, for the greasing of roller- and slide bearings under high working loads. Grease is suitable for central lubrication systems.
GLS 163Thixotropic; NLGI 2From -20°C / +130°C400.000M, PHFor bearings and slide motions, under changing motions and directions , so called osciliating movements. [to long text: Very thixotropic polyurea grease for roller- and slide bearings with paramount feeding in central lubrication devices. Grease containers of central greasing devices must be filled free of air and air-bubbles and be equipped with a pressurized follower piston. GLS 163 is ideal for the gripper shaft lubrication. manroland No. 8B.94S40-0390. So called "intelligent grease" that can change color from green into silvermetallic if the workloads need this to happen. ]
GLS 734NLGI 1-2From -40°C / +140°CSi, LiFor sliding motion excellent for Bowden cables
GLS 764NLGI 2From -40°C / +180°C>500.000Si, PHHigh-temperature grease; contains silicone
GLS 795NLGI 3, 2From -40°C / +180°C100.000Si, oVHigh-temperature grease; when in use with hot air, it is limited to 120°C
GLS 931NLGI 1From -40°C / +90°CPAO, LiFor stepper motors; especially plastic gears; paramount friction values
GLS 932NLGI 1From -40°C / +130°C300.000PAO, LiLubricating grease for aluminium/steel- and plastic /steel- pairings
GLS 933NLGI 2-1From -40°C / +120°C500.000PAO, LiLow-friction grease for rolling bearings, plain bearings and plastic applications
GLS 935NLGI 3-2From -40°C / +120°C1.500.000PAO,Li-spez.Spindle bearing grease
GLS 962NLGI 2From -40°C / +170°C>600.000PAO, PHLubrication of roller- and slide bearings in high-temperature areas
GLS 965NLGI 3, 000From -40°C / +170°C>600.000PAO, PHHigh-temperature grease for high loads in roller- and slide bearings
GLS 966NLGI 2From -40°C / +160°C>600.000PAO, PHHigh-temperature grease for medium- till high speed bearings
GLS 991From -40°C / +140°CPAO, oVFor pneumatic, bearings, gears, slide motions, bars and fittings
GLS 993/N1 (Not H1 ! )NLGI 1From -40°C / +150°C<100.000PAO, oVFor pneumatic, bearings, gears, slide motions, bars and fittings
VP 900NLGI 0From -30°C / +150°CM, Li/CaAdhesive grease for open gears, cam and cam disks
VP 907NLGI 2From -30°C / +120°C1.600.000M, Li-spez.Spindle bearing grease
VP 911NLGI 2From -40°C / +230°C300.000PFE, PAO, soVHigh-temperature grease for waffle ovens, fluted roller bearings, oven hinges

Lubricating greases for the food processing industries

DesignationNoteTemperatures (°C)NdmvalueBaseoil/thickenerRemarks
GLS 361/N1NLGI 1From -25°C / +120°CW, PHAppropriate for lubricating toothed segments and open gears. Assembly grease specifically for the prevention of tribocorrosion/fretting corrosion.
GLS 363/N3NLGI 3From -25°C / +120°C200.000W, aoVHighly adhesive H1 grease for rolling bearings, plain bearings and open lubrication points
GLS 364NLGI 2From -10°C / +120°C>600.000W, PHH1-grease for high rotating bearings (Speedfactor >600.000) for example cutter shaft bearings, slicers, sausage fillers, sterilizers
GLS 367NLGI 2, 1, 00, 000From -10°C / +130°C100.000W, aoVH1-grease for roller- and slide bearings, guides even exposed to water
GLS 380NLGI 2, 1From -10°C / +120°C200.000W, AlH1-grease, with preference for slide bearings with ferrousnon ferrous pairings
GLS 381NLGI 00, 000From -20°C / +120°C200.000W, AlH1-semi liquid grease for gears
GLS 382NLGI 2From -20°C / +120°C200.000W, AlH1-grease for high-load rolling bearings and plain bearings
GLS 388NLGI 2, 1From -10°C / +100°C200.000W, AlH1-grease, very adhesive, for slide bearings, bars, open cog wheels
GLS 595NLGI 3, 2, 00From -40°C / +250°C100.000PFE, oVLong-life grease for high-temperature applications, can only be mixed with grease of same type. Pretreatment with LFC 500 is recommended
GLS 794NLGI 3, 2, 1, 0From -40°C / +180°C100.000Si, oVH1-silicone grease for slide motions, valves, guides, O-ringassembly, etc.
GLS 867PG, aoVH1-assembly grease for EPDM-gaskets, can be well rinsed of
GLS 964NLGI 2From -20°C / +130°C500.000PAO, PHThixotropic polyurea type synthetic grease for roller- and slide bearings. Under normal lubrication the thixotropic characteristics will minimize spin-off of the grease. GLS 964/N2 is particularly recommended for lubrication of gripper shafts or osciliating movement directions.
GLS 967/N1–2NLGI between 2 and 1From -15°C / +130°C100.000PAO, aoVH1-grease with extended resistance to water, acids and alkalis. This very adhesive grease with an elevated base oil viscosity is suitable for badly sealed bearings, such as curved roller bearings.
GLS 980NLGI 2From -40°C / +140°C200.000PAO, AlH1-grease for high loads and temperatures
GLS 991From -40°C / +140°CPAO, oVH1-grease for pneumatic, bearings, gears, slide motions, bars, etc.
GLS 993 H1NLGI 1From -40°C / +150°C<100.000PAO, oVH1-grease for pneumatic, bearings, gears, slide motions, bars, etc.
VP 873NLGI 2From -20°C / +140°C200.000W, synt. ÖlH1-grease for highly loaded roller and slide bearings as well as anti-friction bearings, plain bearings, and open lubricating points. Appropriate for lubricating toothed segments.
VP 874NLGI 2From -20°C / +120°C>600.000PAO, oVH1-grease for linear contacts, recommended by Bosch Rexroth
VP 886NLGI 2From -30°C / +120°C300.000PG, aoVH1-grease with good sliding friction behaviour, UV resistent, developed especially for the lubrication of gripper shafts under UV-influence. The grease has varnish dissolving properties.
VP 889NLGI between 3 and2From -15°C / +130°C100.000synt. Öl, E, aoVH1-grease for sterlizor chains does not leave any stains on the tins