top

Lubricating oils

Our lubricants are characterized by the following qualities:

  • Extended service life of machinery, lubricants protect against wear
  • High and prolonged precision of equipment, wear-resistant lubrication films
  • Long-term lubrication also at boundary lubrication situations
  • Higher production reliability because oils provide good protection
  • Less personnel time involved at maintenance
  • Improved production because of less time allocated for maintenance
  • Less energy consumption as the lubricants cause less friction
  • Cost savings

Mineral oils LFC-1000 series

The LUBRAL LFC-1000 Series are ready-to-use EP high-quality lubricating oils that are mixed with the special LA LUBRAL additive. The LA LUBRAL additive increases pressure resistance, improves adhesiveness, is wear-resistant, prolongs service life of machinery, reduces noise, and provides easy-to-run characteristics.

The oils are anti-corroding, they lower working temperatures, and also reduce friction in boundary lubrication situations. Thereby it significantly reduces energy consumption (up to 30% electric power reduction was measured in 1997 by a Danish customer).

Especially developed "oxidation stabilizers" ensure long service life of oils as well as secure a high reliability.

LUBRAL oils contain non-toxic additives, this means that they are not harmful to health. The LFC-1000 series oils do not contain any PCB and chlorinated components, and can be disposed of as ordinary lubricating oil.

The viscosity classes prescribed by the machine manufacturers should be used.

Mineral oil based - LFC-1000 Series
NameISO-VGTemp.rangePneuHydCent.GearRinsingChainsBearing
LFC 10055-20 / +80XX
LFC 101010-20 / +80XX
LFC 101515-20 / +100X
LFC 102222-15 / +100XX
LFC 103232-15 / +120XX
LFC 104646-10 / +120XXX
LFC 106868-10 / +120XXXX
LFC 1100100-10 / +120XXX
LFC 1150150-10 / +120XXX
LFC 1220220-10 / +120XXX
LFC 1320320-10 / +120XX
LFC 1460460-5 / +120XX
LFC 1680680-5 / +120XX
LFC 110001000-5 / +120XX
LFC 115001500-10 / +120XX
Mineral based adhesive oils - LFC-1000 Haft series
NameISO-VGAnv. temp.GearChainsBearing
LFC 1046H / Haft46-15 / +120XX
LFC 1068H / Haft68-10 / +120XX
LFC 1100H / Haft100-10 / +120XX
LFC 1150H / Haft150-10 / +120XXX
LFC 1220H / Haft220-10 / +120XXX
LFC 1320H / Haft320-10 / +120XXX
LFC 1460H / Haft460-10 / +120XXX
LFC 1680H / Haft680-10 / +120XXX
LFC 11000H / Haft1000-10 / +120XX
LFC 11500H / Haft1500-10 / +120XX

All ISO VG norms are measured at +40 degrees Celsius

The mentioned temperatures are to be used for pre-selection of application. By request of any wider temperature ranges our technical service must unconditionally be contacted.

LEGEND:
Pneu / Pneumatic, Hyd / Hydraulics, Cent / Central Lubrication, Bearing / Bearing Lubrication, Gear / Gearoil, Rinsing / Rinsing Oil, Chain / Chainoil, Comp / Compressoroil

USDA = United States Department of Agriculture, FDA = Food and Drugs Administration, NSF = National Sanitation Foundation, VET = Veterinary Directorate

Semi-synthetic high quality oils LFC-3000 series

Semi-synthetic high-quality oils for the Food and Pharmaceutical Industry with USDA-H1, NSF-H1 and VET approval LFC-3000 series

The LFC-3000 series oils are useful in the Food and Pharmaceutical Industry in the temperature range from -20 °C to + 120 °C (some oils have other temperature ranges, see table below).

The products are resistant against oxidation and aging and are free of resin. They are applicable as lubricants with incidental food contact.

An U.S.D.A.-H1 approval is available in all viscosity classes from ISO-VG-15 to ISO-VG-460.

An NSF-H1 approval is available in all viscosity classes from ISO-VG-22 to ISO-VG-680.

The LFC-3000 Series oils provide good protection against corrosion and are have a good compatibility with plastics and gaskets. The products are mineral oil-miscible. Main application lies in the area of circulation, gear and chain lubrication and for use as hydraulic and pneumatic oils, then HLP and CLP DIN-norms are met.

Olierne i LFC-3000-serien yder en god korrosionsbeskyttelse og har en god forenelighed med kunststoffer og pakninger. Produkterne er mineralolie-blandbare. Hovedanvendelsen ligger som olier til cirkulation, gearkasse og kædesmøring og, såfremt olierne benyttes som hydraulik og pneumatik, så bliver HLP og CLP DIN-normerne overholdt.

Semi-synthetic high quality oils - LFC-3000 series
NameISO-VGTemp.rangePneuHydCent.GearRinsingChainsBearing
LFC 3015 1)15-20 / +120XX
LFC 302222-20 / +120XXXX
LFC 303232-20 / +120XXX
LFC 304646-20 / +120XXXX
LFC 306868-15 / +120XXXX
LFC 3100100-15 / +120XXX
LFC 3150150-15 / +120XX
LFC 3220220-10 / +120XXX
LFC 3320320-10 / +120XXX
LFC 3460460-10 / +120XXX
LFC 3680680-10 / +120XXX
LFC 31150"1150"-10 / +110XX

1) If technically possible, then replacement with LFC 3022 is recommended

All ISO VG norms are measured at +40 degrees Celsius

The mentioned temperatures are to be used for pre-selection of application. By request of any wider temperature ranges our technical service must unconditionally be contacted.

LEGEND:
Pneu / Pneumatic, Hyd / Hydraulics, Cent / Central Lubrication, Bearing / Bearing Lubrication, Gear / Gearoil, Rinsing / Rinsing Oil, Chain / Chainoil, Comp / Compressoroil

USDA = United States Department of Agriculture, FDA = Food and Drugs Administration, NSF = National Sanitation Foundation, VET = Veterinary Directorate