top

 

Oils for the Food Industry

  • Semi-synthetic and synthetic oils for Food Processing Industries
  • Semi-synthetic and synthetic oils for Meat Processing Industries

Our lubricating oils have proven their durability and strength: 

  • Longer life on equipment because the oil has a extra good protection against tear and wear.
  • Longer and better precision in manufactoring due to better protection.
  • Durable oilfilm even under borderline lubrication.
  • Higher production safety due to better lubrication.
  • Reduced time on maintainance.
  • Higher productivity due to less time on maintenance.
  • Reduced energy consumption - well documented tests in lab and real-life.
  • Cost savings.

Series LFC 3000 Semi-synthetic high quality oils

Series LFC 3000. Semi-synthetic high quality oils (CLP-oils; application without extended oil change intervals - this equals normal standard service intervals; oil change according to service manual)

LFC 3000 Series semi-synthetic high quality oils
DesignationISO-VGTemperatures (°C)Remarks
LFC 3015 1)15From -20°C / +120°CPneumatic oil. Rinse oil.
LFC 302222From -20°C / +120°CPneumatic oil. Rinse oil. Hydraulic oil. Chain oil.
LFC 303232From -20°C / +120°CPneumatic oil. Hydraulic oil. Chain oil.
LFC 304646From -20°C / +120°CHydraulic oil. Circulation oil. Gearbox oil. Chain oil.
LFC 306868From -15°C / +120°CHydraulic oil. Circulation oil. Gearbox oil. Chain oil.
LFC 3100100From -15°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 3150150From -15°C / +120°CGearbox oil. Chain oil.
LFC 3220220From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 3320320From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 3460460From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 3680680From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
LFC 31150[~ 1150 ]From -10°C / +120°CGearbox oil. Chain oil. Bearing lubrication oil.
1) If techically possible, then replacement with LFC 3022 is recommended.

Series LFC 34000 Semi-synthetic high quality oils

Series LFC 34000. Semi-synthetic high quality oils (CLP-oils with FE 9-extended-test-run at +40°C; extended oil change intervals are possible; special gear oils with paramount anti-wear properties from +40°C onwards) 

LFC 34000 series semi-synthetic high quality oils
DesignationISO-VGTemperatures (°C)Remarks
LFC 34068 1)68From -15°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 34100 1)100From -15°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 34150150From -15°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 34220220From -15°C / +120°CCirculation oil. Gearbox oil. Chain oil.
LFC 34320320From -10°C / +120°CGearbox oil. Chain oil.
LFC 34460460From -10°C / +120°CGearbox oil. Chain oil.
1) CLP oils with FE 9 extended-test-run at +40 oC


 

CLP3-Lube Range semi-synthetic oil

Semi-synthetic high quality oils for Food Processing Industries. NSF-H1 type. The oils are specially designed for use in food processing and pharmaceutical industry in the temperature range from -20 °C to +120 °C (see list).

These lubricants are qualified as NSF H1 type lubricants and also comply with Title 21 CFR 178.3570 by the Food and Drug Administration (USA) for lubricants with incidental food contact. The lubricants are tasteless, odourless, premium quality lubricants formulated with non-toxic NSF/FDA listed food grade additives and base oils. The oils have high anti-oxidation and anti-aging properties, are free of Resin and Zink. The oils can be used where there is risk of incidental contact with the product.

The oils offer a very good protection against corrosion and are good compatible with most plastics and sealings. The products are miscible with mineral oils.

Well suitable for lubrication in circulations- and central-lubrication systems, gears og chains. HLP and CLP DIN-standards are meet. 

CLP3-Lube Range semi-synthetic oil
NameISO-VGTemp.rangePneuHydCent.GearRinsingChainsBearing
CLP3-Lube-015-SDG15-20 / +120XX
CLP3-Lube-022-SDG22-20 / +120XXX
CLP3-Lube-032-SDG32-20 / +120XX
CLP3-Lube-046-SDG46-20 / +120XXXX
CLP3-Lube-068-SDG 1)68-20 / +120XXXX
CLP3-Lube-100-SDG100-20 / +120XXX
CLP3-Lube-150-SDG150-15 / +120XX
CLP3-Lube-220-SDG220-15 / +120XXX
CLP3-Lube-320-SDG 1)320-10 / +120XXX
CLP3-Lube-460-SDG460-10 / +120XXX
CLP3-Lube-680-SDG 1)680-10 / +120XXX

1) Product NSF-H1 approval

All ISO VG norms are measured at +40 degrees Celsius

The mentioned Temperatures is to be used for pre-selection of application. By any wider temperature range, our technical service must be contacted unconditionally.

LEGEND:
Pneu / Pneumatic, Hyd / Hydraulics, Cent / Central Lubrication, Bearing / Bearing Lubrication, Gear / Gearoil, Rinsing / Rinsing Oil, Chain / Chainoil, Comp / Compressoroil

USDA = United States Department of Agriculture, FDA = Food and Drugs Administration, NSF = National Sanitation Foundation, VET = Veterinary Directorate

CLP9-Lube Range

Synthetic high quality oils for Meat Processing Industries. NSF-H1 type. The oils are specially designed for use in Food production plants in the temperature range from -40 °C to +150°C (see table).

These synthetic oils are designed for an extended temperature range (up to +180°C for a shorter period of time). They feature good air or water separation characteristics, and do not carbonize at higher temperatures. They are compatible with mineral oils.

These lubricants are qualified as NSF H1 type lubricants and also comply with Title 21 CFR 178.3570 by the Food and Drug Administration (USA) for lubricants with incidental food contact. The lubricants are tasteless, odourless, premium quality lubricants formulated with non-toxic NSF/FDA listed food grade additives and base oils. The oils have high anti-oxidation and anti-aging properties, are free of Resin and Zink. The oils can be used where there is risk of incidental contact with product. 

The oils offer a very good protection against corrosion and are good compatible with most plastics and sealings. The products are miscible with mineral oils.

Well suitable for lubrication in hydraulic-, circulations- and central-lubrication systems, gears og chains. HLP and CLP DIN-standards are meet.

CLP9-Lube Range
NameISO-VGTemp.rangeCompHydCent.GearPneuChainsBearing
CLP9-Lube-015-SDG15-45 / +150XX
CLP9-Lube-032-SDG32-45 / +150XXX
CLP9-Lube-046-SDG 1)46-45 / +150XXXX
CLP9-Lube-068-SDG68-40 / +150XXXX
CLP9-Lube-100-SDG 1)100-40 / +150XXXX
CLP9-Lube-150-SDG150-40 / +150XXXX
CLP9-Lube-220-SDG220-35 / +150XXXX
CLP9-Lube-320-SDG320-35 / +150XXXX
CLP9-Lube-460-SDG460-35 / +150XXXX

1) Product NSF-H1 approval

All ISO VG norms are measured at +40 degrees Celsius

The mentioned temperatures are to be used for pre-selection of application. By request of any wider temperature ranges our technical service must unconditionally be contacted.

LEGEND:
Pneu / Pneumatic, Hyd / Hydraulics, Cent / Central Lubrication, Bearing / Bearing Lubrication, Gear / Gearoil, Rinsing / Rinsing Oil, Chain / Chainoil, Comp / Compressoroil

USDA = United States Department of Agriculture, FDA = Food and Drugs Administration, NSF = National Sanitation Foundation, VET = Veterinary Directorate